-
Hello,
I just installed the MMM-DHT22 module
here is my installation with a RasberryPi and DTH 22 (not 11) :
[url=http://www.noelshack.com/2020-28-2-1594129752-schema-electrique-magicmirror-768x793…
ghost updated
2 years ago
-
So I don't know if this hardware or software issue. I got the example temperature sketch to work but after start up the serial monitoring display nam for the results of the temp and Humidity until i d…
-
**BUG DESCRIPTION**
Hello *. I have a problem with my DHT22. After some time (hours, days) I get null values from sensor. So I attached 2 sensors to my raspberry pi via GPIO2, 27.
The results are …
-
Hello, I am working with the zolertia soul re-mote revb, with the last version of the repo the example for getting readings from the dht22 temperature and humidity sensor is not working.
contiki/e…
orlax updated
5 years ago
-
I have 2 temp sensors next to each other installed in my airrohr: DHT22 and BMP/E280
The readings are verry different.
DHT22 | Temperatur | 8.8 °C
DHT22 | rel. Luftfeuchte | 88.4 %
BMP/E280 |…
-
- Capture the temperature using DHT22.
- Capture the humidity using DHT22.
- Water temperature sensor (DS18B20).
- PH sensor (Pro SKU SEN0169).
- 2 Fans.
- Verin.
- Relay a 4.
-
When using new Pico W together with the DHT22 sensor I get a reading the first time I run the code. The second time and all the following I get the ENOMEM error. I need to physically disconnect and re…
-
is my sensor broken or is the firmware not measuring correct?
https://github.com/arendst/Tasmota/issues/1051#issuecomment-1288423223
dr-ni updated
2 months ago
-
See below - this is the output I get using the example sketch with a DHT22 connected.
Each blank line indicates when I've pressed the reset button on the Arduino.
NB I'm using a modified version…
-