-
I have been struggling with this for quite sometime. Many posts exists concerning ESPHome WiFi connection issues resulting in "EOF received" and "Connection reset by peer" messages in HA logs when usi…
-
### What happened?
When using the single power button on a Philips Hue Dimmer V2 bound either to a group (with Hue bulb) or single Hue bulb, the on/off button gets out of sync requiring a second pres…
-
Hi,
I'm trying to setup a tuya based dimmer but for some reason it just doesn't work.
my (relevant) info from iot.tuya is:
(also key and dev id... )
"category": "tgkg",
"name": "dimmer-…
-
Would be great if you could add support for the "new" Dimmer 2 as well! Should have some improvements over the first one.
If you need one physicaly i cant send you one so you can do your magic, and…
-
I'm seeing odd behaviour when setting the min dim value via setCapabilityOptions.
When using that, it seems to allow the lowest value to go negative when you slide down the minimum value. This is i…
-
### Problem description
Dimmer does come in as a dimmer, however the device also has two buttons intended for scene selection. These do not show up.
### Solution description
I would like to use the…
-
Got a couple of cord dimmers that reports as an Eco-Dim 07 / Eco-Dim 10 works quite well with zigbee2mqtt but logs are filling up with :
```
Publish 'get' 'power_on_behavior' to 'Dimmer Up Livingro…
-
Hi. I'm trying to integrate a dimmer with 2 Gang but I can't. I only managed to access one of the two ways. I have switches with 2 Gang in which in home assistant each way is detected as an indepen…
-
If the labels for mode select aren't set correctly you get an obscure error.... This is because I altered the ep order and now the ep in flash on mode select doesn't match my actual ep. This scheme of…
-
**Device normal info**
- Gosund (TanTan)
- Model
**Device info (please complete the following information, which can be found in [log](https://github.com/tuya/tuya-home-assistant/wiki/How-to-get…