-
OK folks I just updated the develop branch. I did a massive amount of code changes.
There is also a new file called RUN_ME.py. this is a test program. You can run this if you like it will prompt yo…
-
Wolle,
Recall the intent was receiving BBC HLS M3u8 playlist of TS segments
I've built two identical radios'
Configuration:
ESP32 Devkit S3 N32R8
ILI9341
PCM5012
Max 98306
12V to 5V 5A D…
-
**sdrtrunk Version**
Fork of master-branch
**Describe the bug**
When running about 17 P25 sites with phase 2 voice, some channels go into TEARDOWN state and remain in that state until SDRTrunk is…
Nokoa updated
9 months ago
-
**Describe the bug**
When decoding a DMR Tier III Cap Max system the call events duration value is showing 0.0 or 0.1 seconds in length.
**Additional context**
Attached control channel bitstream …
-
Getting error message every 10 seconds:
```
22:38:08.542 [WARN ] [ol.philipstv.service.TvChannelService] - Error occurred during handling of command for TV Channels: Cannot deserialize value of …
-
### Time line
- [Maxwell's demon: Does life violate the 2nd law of thermodynamics? | Neil Gershenfeld and Lex Fridman](https://www.youtube.com/embed/eS0JXViv0cU?start=81&end=281&version=3), start=81&…
-
Hello Yupeng,
There is an error for the latest version (1.4.7) installed from conda, failed to test DMRfind when running `python run_test.py`. See the following test output:
```
Tests start
Wed …
-
### The problem
I turn on the TV (connected via Lan, the address is static), the media player in HA turns on, and after a while it turns off.
Turned on the debugging in the log, I do not see anyth…
-
I encountered a problem with audio output with the "-o pulse" switch.
I receive DMR Simplex and during the audio output I hear speech and at the same time a noise like a duck quacking.
The speech …
-
@smangels @sm7eca Does this code contain the implementation of DMR? Tier1 / Tier2?