-
I'm unable to compile even the simplest sketch using FastLED on an Adafruit Grand Central M4 Express with DotStar LEDs.
12 pixel DotStar strip connected to the Hardware SPI pins (Pin 51 Data, Pin …
-
### Is your feature request related to a problem? Please describe
First off: Great work with this software. It's the best custom Ambilight solution I've found so far.
Sadly only Neopixel strips are …
-
APA102 allows each pixel to have a 5 bit global brightness value in addition to the 8 bit RGB values for each pixel. This library doesn't allow that to be set - see this comment
```
# Each p…
-
We've been putting together an RP2040-based mech keyboard product that uses individual GPIO pins for keys in lieu of row/column scanning. From a "basic hobbyist tinkering" perspective, individual GPIO…
-
**Is your feature request related to a problem? Please describe.**
The Mbi6033 is a 12 channel chip that shows up in some strips driving 4 RGB LEDs.
It is a Two Wire (DotStar) with a unique reset …
-
- Arduino board: **ItsyBitsy M4 Express**
- Arduino IDE version (found in Arduino -> About Arduino menu): **2.0.4**
- List the steps to reproduce the problem below (if possible attach a sketch…
-
This was intentionally left out of #47 just to keep that PR as simple as possible, since it was a major conversion. With that PR now in place, can look at adding the ability to pass in a non-default S…
-
good day. It would be very nice to add support for the M150 command to the Duet 2 Maestro and other boards .. I understand that there is no ready-made connector with level matching for the DotStar and…
-
Hello, I'm trying to do the Mando Puter for the beskar guantlet, but i didn't find the same display that the one show in this github.
i'm working with Adafruit Feather M4 Expres and a random LCD
!…
-
If NeoPixels are created without specifying a `bpp` or a `pixel_order`:
```python
pixels = neopixel.NeoPixel(board.D18, 8)
```
then this would get used:
https://github.com/adafruit/Adafruit_Circu…