-
Currently, the [EleksMill](https://wiki.comakingspace.de/CNC_Mill#EleksMill) from Mitja is usable, but requires quite experiences users to operate it. This is basically due to the Machine not having E…
-
Hi. Laser GRBL. Great program but 5 hours to make a coaster seems a bit slow?
My image is based on line art, and no more than 100 mm x 100 mm. Hardware is Eleksmaker A3 Pro 250 mW and is completely…
-
Hi,
I hope you guys can help me figure out what is going on. I got Laserweb with grbl and an EleksLaser pretty much running. But the canvas preview is not working right.
Frontend: 4.0.989
Backe…
-
Hello,
I updated the firmware to 1.1h several months ago. The version of LaserGRBL at the time worked fine with the 1.1h firmware. I went to use the machine today and LaserGRBL updated to the latest …
-
Hello,
I've recently acquired a cheap laser with a 1x1 meter table, and it's been a hoot so far.
On my tiny laptop I have with it, the Eleksmaker software is just a buggy mess, so I went with Lase…
-
I just started using LaserGRBL again (v3.0.4) after some time away. Have to use hard reset to prevent steppers from jittering. At connect the laser flashes on for an instant. Works fine otherwise. …
-
Is anyone with an Eleksmaker A3 pro able to burn a perfect vector circle?
Steve
-
I have just installed Octoprint and Better grbl support on a raspberry pi and I am getting the error 25 (Invalid gcode ID:25 Repeated g-code word found in block.). I have tried a couple of times and i…
-
Hello
I'm new from GRBL forum and I would ask how are the settings for cut 3mm wood
I use art cam for CNC Laser route but i do not able to cut plywood-
how I can sure that the power of laser is 10…
aldva updated
4 years ago
-
Good day to everyone! I got a trouble with laserweb mill gcode generation. I made a model in sketchup and export it in dxf format. After the model appeared in laserweb, I set settings in the fields (l…