-
Nice work! Well done Renato Aloi !
I would like to ask if that library supports client connections ( ENC28J60 acts as web client, not as web server)
Regards,
Vassilis
-
I'm using ENC28J60 module with Raspberry Pi Pico microcontroller.
How can we set the IP address to the ethernet module using micropython?
After assigning, how can we access the network socket usin…
-
Now that all RAM buffers were moved from Arduino's RAM to ENC28J60's RAM, so the last functionality missing is DHCP handshaking.
Need to do work on that.
-
**Describe the bug**
When adding enc28j60 to a pi and creating a bridge, there appears to be a discrepancy of 4 bytes when traffic is crossing the bridge and SPI eth port. This causes full size packe…
-
Hi,
Klipper is probably 3D printing's most advanced firmware.
It is a two part system where the hard math is done on a real computer, and the real time stuff is done on a microcontroller.
A s…
-
Hi, has anyone had any luck getting the enc28j60 example working? I am aware that it was disabled because it was not working on stable. However a nightly cargo build using the following command:
`car…
-
Hi,
If I try to establish a TCP connection between ENC(TCP server) and PLC(TCP client), the PLC starts a "broadcast". There is padding inside.(I'm sniffing with wireshark)
ENC does not add padding …
-
Hi
I have connected my ENC28j60 to my Mikrocontroller and the .begin() returns true, so it should be correct wired.
But whatever I do the DHCP returns an error.
What is my issue ?
-
I see on the ENC28J60 datasheet that Link Status can be read from the physical status registers. The project I'm working on is a network line testing tool, and currently it checks for Hardware Link St…
-
Arduino Micro is simliar to ardunio Leonardo ethernet, that is; it has a spi breakout. I've found that there are diffrences when it comes to SPI_SC.
I thought that this excellent post would solve …