-
High Kris,
I had previously done tests with higher serial data rates and discussed them on groups.io.
I had successfully tested the FW/SW (rc3/rc3) with 115200 (default), 250000, 500000 and 100000…
-
I may have spoken too soon on #8 - it stopped working in 28256 mode in my BE6502 when using `-spi n` (`y` works).
Also, the transfer time almost triples when using `-spi n`:
* `-spi n`: `Time ta…
-
So I'm a fairly green electronics hobbyist, and I was wondering if it would be easy to make this work on the IBM 5140's dual socket interface, probably with some form of daughter/adapter board.
I f…
-
I was wondering if you would consider adding 23xx support, the difference is only in pinout. This would make it handy to use in things like ZX81/TS1000 without an adapter.
-
Hi Kris,
When uploading a binary ROM image, the 64k limit is not checked.
The script crashes when the file exceeds this limit.
Use case:
128kB image file for a target with 2 * 64kB EPROM (2 * …
-
The CRT version is not functioning properly (did not find any clue on how to get it work right yet - please inform if there is a workaround).
PROBLEM: using the CRT version, the stack is always 'fu…
-
Wonder if this could be added, as it offers less bugs than the plain Anonymous Generic Turbo XT and offers more features.
> Besides fixing several bugs from the Generic BIOS, many additional featur…
-
Hi Kris,
in setup() you starting the emulator with EN_RST = LOW, with means, the target is not in reset.
pinMode( EN_RST, OUTPUT ); digitalWrite( EN_RST, LOW ); // disable outputs to start with…
-
It would be great if DOSEMU2 could support the [OPL2LPT](https://www.serdashop.com/OPL2LPT) and [OPL3LPT](https://www.serdashop.com/OPL3LPT) devices.
With "support", I mean the ability to present t…
-
zasm generates an Intel Hex file with origin zero, regardless of the actual origin set in the code. The zero origin is hardcoded in the writeHexFile routine. The reasonable (and expected) behaviour wo…