-
Today I devoted all my free time to this project in search of problems in which my readers did not work, I fully studied the part of the code responsible for rfid, I was finally able to make everythin…
-
I have no set up my keypad weigand reader, am I mistaken but is only the rfid tag supported method of access or can the number pad be used also?
-
Please add support for the esp8266 arduino platform
Found chip PN532
Firmware ver. 1.6
Waiting for an ISO14443A card
but nothing from the cards ...
-
Hello,
What a nice project! I have the RIFD working, only it does not read keypad numbers?
I added a pin code to the RIFD, but that didn't work.
esp-rfid Access Control 1.3.5
Any idea?
-
Having loads of trouble with this one, the device keeps dropping the WiFi, needing a reset button push.
System cannot be recovered without a physical reset.
Device puts OpenEVSE main board in a s…
-
**Describe the problem you have/What new integration you would like**
I think it will be very useful to add support for Wiegand reader devices. They can be used to integrate secure access contr…
-
I'm trying to upload the program to an esp32 devkitv1 and I get the following issue.
When I press the upload button in vscode the firmware is uploaded to the ota_ 0 partition instead of the factory…
-
I am using a ESP32-S3-DevKitM-1 with PlatformIO and Arduino Framework. This is my platformio.ini config:
```
[env:esp32-s3-devkitc-1]
platform = espressif32
board = esp32-s3-devkitc-1
framework…
-
Hi everyone, real nice project!
I have the problem that the mqtt broker is losing the connection every one till two days.
At the moment my broker sends me a mail and i restart the device with the we…
-
Hi, i cant connect to broker on my raspberry.
Broker: Mosquitto 1.4.10
on serial i m getting rc=-2 acording to documentation it is network connection failed.
On mosquitto log i m getting `New conne…