-
# Problem
Attempting to compile in the Arduino IDE results in the following error:
```
/home/user/air_gradient_open_air_firmware/examples/OneOpenAir/OneOpenAir.ino:40:10: fatal error: AirGradient…
-
I'm using an ESP32, ILI9341, which I can control with fill back grounds, draw lines etc. I can read text files and display them from the SD card using Serial.print, but no matter what I try for JPEGs,…
-
Hi,
I want to rewrite the micro_ros_subscriber for example_interfaces/msg/String.
However, when I tried to modify it myself, I encountered an error and couldn't proceed any further. I would like to…
-
### Related area
platform support for esptool
### Hardware specification
(relevant to all)
### Is your feature request related to a problem?
If pyserial is not installed on the base system, espto…
egnor updated
3 months ago
-
It does not matter what I do with the library, it always throws these errors. This one was with the ActisenseListener example.
```
/home/johannes/.arduino15/packages/esp32/tools/xtensa-esp32s3-el…
-
I am using the library with ESP32 and Arduino IDE. I try to set the buffer size to 256000 bytes but no matter how i do it, it's always limited at 53248...?
-
Hi,
I'm using the Arduino IDE (1.8.13) with a WEMOS D1 MINI ESP32, attempting to get a cheap andcheerful PS3 controller working over bluetooth. When I use the Arduino library manager to download t…
-
### The problem
when compiling for the first time everything works fine, but when you change the yaml code and want to compile again the previous old binary file is downloaded, i have same issue for …
-
### Board
Adafruit QT-Py ESP32-S2
### Device Description
Plain board.
### Hardware Configuration
No.
### Version
v2.0.2
### IDE Name
Arduino IDE
### Operating System
m…
-
Do you have a plan to support the mutual TLS authentication on the WiFiS3 library ?
This feature is available on ESP32 now. The Uno R4 uses the ESP32 as Wi-Fi module, So I think it does not need to…