-
After uploading firmware I wasn't able to connect to AP with default password (esp32cam#). I'm not sure why. I tried Macbook, iPhone and Android phone. After changing password to 12345678 and upload f…
-
thank you for the detailed video about the esp32 ... i have the esp32cam board with the board attached to it like you show also i the video
but how can i connect the pir to this version . there are n…
-
Hi! I have plugued an ESP32CAM to TFT32's WIFI UART. I can ask temperature, move motors, and do other things; But how can I get list files from TFT SD slot (and/or USB)? Is it implemented? M20 give…
-
-
https://github.com/geeksville/Micro-RTSP/blob/43dd876fb9ffb882397b446cb4374bde280f9f69/examples/ESP32-devcam.ino#L184
While trying to build this example using pio, I get the following error: error:…
-
`CC build/main/app_main.o
In file included from /home/pi/esp32/esp-idf/components/esp32/include/esp_timer.h:44:0,
from /home/pi/esp32/esp-idf/components/freertos/include/freertos/po…
-
Congrats for the code. Could you please specify the wiring in the ESP32cam and Esp8266? something I misunderstand and the nrf2401 fails
Thank you very much
-
### The problem
Everything used to work fine. VINDRIKTNING pm sensor, Dallas temp sensor, and esp32s cam board https://www.instructables.com/ESPHome-Esp32Cam-IKEA-VINDRIKTNING/ just this but with a D…
-
When default resolution increased to 800x600 the firmware cannot init camera:
```
10:00:32.260 > [ 432][V][main.cpp:289] initialize_camera(): initialize_camera
10:00:32.266 > [ 432][I][main.cpp…
-
Many boards use the serial RTS and DTR pins to control the MCU reset and GPIO0 lines - to enable "hardware reset" and firmware uploads for your board.
For example - here's a simple, working, perl t…