-
Hi everybody,
This issue is about improving the documentation.
I'm using ESTLCAM for CAD-CAM. And I'm familiar with the GCode in general.
But I haven't found any information about how to proper…
-
Grbl_ESP32 Ver 1.1f Date 20200319
I am using an ESPDuino, CNC Shield and ESP32_Grbl successfully with an MPCNC, Grblgru and 4 axes. Both USB and BT work well.
I soldered wires to the ESPDuino pins 1…
-
MKS-DLC32 V2.1 (printed on circuit board)
Display says: MKS DLC32 CNC V2.0 : V2.1(8M.H35.20220510) : CPU:Freq:240MHz/ T:53.3C/ ID:42017
As soon as I start a g-code program from the SD card, I get th…
-
Hello.
There is something I want to ask you.
I use the Universal Gcode Sender program when engraving wood with CNC. Sometimes while scraping the program (UGS) goes into offline mode and won't le…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
I am using some custom menu items which run M42 commands to switch relays on and off.
When I start …
-
How can i connect ESTLAM (win64) with this Board?
ESTLCAM does not connect with USB and GRBL Setting...
-
The mpcnc project uses Marlin as the firmware to run this CNC multitool machine. There are users that generate their g-code with estlcam software, and this g-code use `G0` without feedrate specified i…
-
I tried to mill/drill a hole with G2 codes (I using Marlin RC8) but finally it ended up in a hole with triangular like shape.
I simulate the g code with CAMotics and their the hole looks fine. Maybe …
-
Hi.
I build my own CNC from polymer concrete
[Photo](https://photos.app.goo.gl/WLovmMFLqDHvX3r19)
and I have some mechanical error , search CNC control
system for software compensation.
Is pos…
-
In der Readme steht:
(GRBL oder andere Firmware kann nach entsprechender Konfiguration auch mit der Platine verwendet werden)
Gibt es dazu mehr Details, wie eine entsprechende Konfiguration aussi…