-
**Describe the bug**
mimxrt1160_evk/mimxrt1166/cm7 : can't continues flash, always report verifing image fails.
Please also mention any information which could help others to understand
the probl…
-
We have a RT1050_EVB board with QSPI flash boot enabled.
DAPLink firmware compiled out within this ARMmbed/DAPLink isn't working.
I have tried all below three, none of them works for me.
1.…
-
-
I'm unable to get the utility to work with my RT1170-EVK because it enumerates as USB HID device with vID 0x0D28 and PID 0x0204 rather than the expected vID 0x1FC9 and PID 0x013D
-
Ideally defines such as
https://github.com/xmos/lib_sw_pll/blob/321c7ce9d8a1c30ace94f045aa0d2c5578f1371d/lib_sw_pll/src/sw_pll_common.c#L63
Would be built up from the required values using macr…
-
Hi,
Hope you are all well.
I am working on the jailhouse of IMX8MP-EVK. I can enable the jailhouse and test the sample binary files. However, when I add GPIO to the code, the jailhouse enables p…
-
Based on some other issues reported here #334 ,
I did a simple test to reproduce a LIBUSB_ERROR_TIMEOUT problem that I have on a board:
> SDP: boot -f imx-boot-sd.bin-flash_evk
> SDPV: delay 100…
-
https://github.com/RT-Thread/rt-thread/tree/master/bsp/lpc55sxx/lpc55s69_nxp_evk
-
On 1170-EVK SD-Card driver is not working.
-
Dear @TerryLv,
I am trying to port the scripts for iMX8MPEVK with the patch in attachment. However, when creating the base image from the Yocto-built image (yocto-bsp-lf5.15.32-2.2.0, bitbake swupd…
l4es updated
6 months ago