-
Following @ITmaze [suggestion](https://github.com/clsergent/Snapmaker2Postprocessor/issues/3#issuecomment-1397758118), I open this discussion. Per his own [words](https://github.com/clsergent/Snapmake…
-
It would be nice to have options that would enable ooze prevention without making the tall skirt......and, during the tool change to have a delay that let one hotend cool while the other heated up....…
-
-
When slicing objects in Cura 13.06.4 with thin walls (wall thickness equal to shell thickness set in Cura) the new slicing algorithm in 13.06.xx adds infill "dots" about every 4-5 mm between the skins…
-
### Version
found and tested solutions for 2.3.0, but found for 2.4.0 alpha 3 as well
### Operating system type + version
Win10
### 3D printer brand / version + firmware version
Craftbot Flo…
-
Hello, looooo.
I was very surprised to find timing gears in FCGear workbench after doing an update. (I also upgraded to FC 0.19). I was waiting so long for a way of creating timing belt gears direc…
-
### Is your feature request related to a problem?
when printing slanted surfaces the infamous staircase effect is almost always visible.
Generating in between lines at half the height or even quarte…
-
Support interfaces are only being generated under the outer perimeter.
They are not being generated under the inner perimeter, nor the solid infill.
Although it makes sense in certain situations…
-
I think there are 2 Bugs in the Artisan Firmware when it comes to auto-leveling:
**Problem 1**: It feels like the auto bed leveling does not take different zones into account. Or is not working at …
mmack updated
6 months ago
-
The problem presented by the seams at layer change needs little introduction. It is sometimes trivial and sometimes important and PrusaSlicer offers a lot of variables that can alter the seam location…