-
I'm opening this issue myself to highlight a known problem. I cannot get PWM output on Trinket M0 pin 3. It is connected to hardware pin PA07 which is identical to pin 9 on Arduino Zero, Arduino M0 Pr…
-
Hi, i want to port your project to my cortex M0+ board (Feather M0 WiFi), so i download your repo and start a new arduino project with Arduino IDE, setup all things but i`m stuck with this error:
`…
-
I was trying to get the Zephyr [blinky example](https://github.com/zephyrproject-rtos/zephyr/blob/master/samples/basic/blinky/src/main.c) work on an Adafruit Feather M0 and noticed it doesn't work str…
-
IRLibDecodeBase uses Serial.print statements throughout to log information to the console.
In the SAMD21 M0 board, the method for printing to the USB console is exposed via SerialUSB.print.
As a…
-
Loving this project. Only problem is the M0 is on short supply. Would the M4 or similar work? https://shop.pimoroni.com/products/adafruit-feather-m4-express-featuring-atsamd51-atsamd51-cortex-m4
-
Would this firmware work with this
https://www.adafruit.com/product/4818
and a feather m0?
https://www.adafruit.com/product/3178
-
Built out three modules using the Feather M0 RFM9x boards and the RippleV5-USB-feather.bin firmware. I keep getting "Not connected" when I try to send messages from my Samsung S20. Ripple is configu…
-
The package now only supports USB serial (Serial) on Feather M0 devices...
Would like to reassign to another serial port as needed at compile or run time...
-
Needs:
- Feather M0 RFM69 LoRa 900 MHz Board
- RFM69 LoRa 900 MHz Pi Bonnet
- Raspberry Pi 3 B+
- 2X SD cards
I should ask Paul first and then go to startup funds.
-
I was having an issue with the example code (accelGyro) not running, and freezing com ports, etc. I traced the issue to having
Wire.begin() in the class constructor: DFRobot_BMI160::DFRobot_BMI160(…