-
I selected lokal firmware and the Fettec FC was not able to flash.
Give it a look guys.
Had to flash with 2.0.27
-
I just took my Fettec FC + Fettec 45A ESC setup out for the maiden. It flew beautifully, very impressed! However there seems to be a bug with the 3D mode and motor direction settings.
I set up the …
-
### Is your feature request related to a problem? Please describe.
I currently use APD ESCs on an xclass build since they have been the most proven ESC to not fail compared to other brands ta…
-
Hello,
so my first flights are done. I can say that Kiss is a thing for sure- my quad feels so light, responsive and hmm just good. I've had some issue though. My quad dropped from the sky. Usually…
-
Software:
Kiss GUI v2.0.27
FETTec Configurator 0.1.23
Hardware:
FETtec KISS FC
FETtec 35AMP 4-in-1 ESC v1.0
DJI Caddx Vista
TBS Nano receiver
Serial port configuration:
Serial1 KissProtoc…
pejer updated
4 years ago
-
Hi,
I am getting this error once I connect tot he FETtec configurator and click on the telemetry button settings button. I can connect fine and see all 4 ESC's in the overview. I plug in the micro US…
ebeez updated
4 years ago
-
I've been flying for the last few months without any issue using the following equipment:
- ImpulseRC Apex with FETtec F7 KISS FC & Flyduino 4in1 25A ESC (running 4s)
- Apex regulator & OSD boards…
udyux updated
4 years ago
-
I've already got a pretty good idea of what's causing the problem but figured, for posterity's sake, I'd open an issue in case I'm either wrong or someone else is experiencing the same behaviour.
T…
udyux updated
4 years ago
-
When I use the ESC-Telemetry to read out Current and Voltage Data, I can't set an offset to Current and Voltage. Most ESCs don't provide a way to scale the Voltage and the current the ESCs read out ar…
wuzle updated
4 years ago
-
**Describe the bug**
Hi guys! I'm having an issue with Emuflight 0.3 where the gyro appears to cease functioning (no output on sensors page) and sometimes cause settings to get changed - Whilst tryin…