-
Thank you for sharing the phantastic project!
I sucessfully tried out myself.
The TD158 are not compatible with the TD161 or TD164 or TD112 and seem to have another protocol.
Has anybody info…
-
Since the NFC refactoring, neither nfc_worker lib nor FuriHalNfcDevData object is available in Flipper Zero Firmware.
-
Hello Bruce!
I would like to advise a new introduction, but I don't know at all if it can be added, in general, do the same as flipper zero selection for opening gates, slagbaums and the rest
…
-
Hello, I do not have a PICkit but I did a little digging and I found that the flipper can emulate JTAG or SWD protocols with its GPIO pins and execute using openocd instead of the Microchip software. …
-
### Describe the enhancement you're suggesting.
Currently flipper zero(Universal Remote Feature) sends a bunch of standardized codes for power on, power off, volume up/down etc....
I think for those…
HeIp updated
2 months ago
-
Hi, i have follow guide on [https://github.com/SequoiaSan/FlipperZero-Wifi-ESP8266-Deauther-Module](https://github.com/UberGuidoZ/Flipper/tree/main/GPIO#esp8266) and create a board with Wemos. Unfortu…
vin86 updated
4 months ago
-
### Describe the bug.
When the SubGHZ application is launched, and then the NFC application is used, the latter crashes and the Flipper Zero restarts.
### Reproduction
1. Launch the SubGHZ app.
2.…
-
Currently Rust for Flipper Zero [requires a nightly toolchain](https://github.com/flipperzero-rs/flipperzero/blob/19b185e63f60572da8a7418185f5e5b87f6f6959/crates/rust-toolchain.toml) to build binaries…
-
Hi,
i have made the microsd card modification to the developer board, from the android interface everything seems to work well, but when i look on the microsd there are no .pcap files saved (the mic…
-
### Description of the feature you're suggesting.
There are parking barriers that have a CAME 24bit protocol on 433.88 MHz. It would be nice if the Flipper Zero could support this, even with multip…