-
### Problem description
The device is connected, but nothing is available beside the firmware version.
### Solution description
I would like to have full support for sensors and temp settings
### …
-
TuyaSiren _ZTE204_t1blo2bj appears only as an on/off switch and is missing the other end points.
It appears to be because it is using quirk: zhaquicks.tuya.ts0601.siren.TuyaSirenGPP_NoSensors
I ex…
-
### Problem description
This Unit is TS601 based sensor, I tried to integrate it by copying the code from Variation 04 with some success : I can get the Temp and Humidity readings, but the battery …
WLCD updated
3 months ago
-
### Problem description
Not supported device in ZHA
Smart WiFi Zigbee Chlorine Meter PH ORP EC TDS Salinity Temp CL Tester Swimming Pool Water Quality Analyzer
https://www.aliexpress.com/item…
-
### Problem description
The device in question doesn't report any information
the device:
https://www.aliexpress.com/item/1005006861229185.html?spm=a2g0o.order_list.order_list_main.40.faef1802VfX…
-
### Problem description
I recently acquired this device: https://www.amazon.com/dp/B0D63CR311
It is a smart on/off switch coupled with a temperature and humidity sensor. It can be added to ZHA, bu…
-
### Problem description
My Tuya curtain motor is not recognized by HA.
"This device is currently sold as "Tuya curtain motor gen 3".
Support for the same device has already been added to zigbee2m…
-
### Problem description
Request for support for Mercator Ikuu Combination sensor for ZHA.
https://www.ikuu.com.au/product/combination-sensor-2/
### Solution description
Currently adds to ZHA …
-
### Bug description
Using ZHA.
Problems that occur.
1. Device (automatically) turns on light but not the state.
Reproduced when I Read the 0x0006 (cluster) and the 0x0000 (atrribute)
…
-
### Problem description
Electrical measurements in this device not working properly - current and summation delivered (kWh) are too high.
### Solution description
Please correct the current multipl…