-
## Here are the steps I follow to reproduce the issue:
1. Use LinuxCNC built from Master
2. gcode made by Lightburn with M67 E0 Qxx commands in G90 mode
3.
## This is what I expected to hap…
-
**Please describe the feature you would like implemented**
G-code control of scanning laser galvonometers. I guess this would require some transformations that convert between cartesian and galvo DA…
-
All of my paths show up at one tenth the size, my board interperts mm, my gcode is in mm, my cam software is in mm, why does bCNC seem to move my pinter with the decimal point in the wrong spot?
-
Running octoprint on a Pi.
It has worked well for a few years talking to a Prusa Mk3S+.
I've just upgraded the Prusa to Mk3.5 where Prusaslicer delivers BGCode.
So, I select your BGCode plugin to …
-
This bug, [discussed on emc-developers](https://sourceforge.net/p/emc/mailman/message/35086608/), hasn't yet been resolved.
## Here are the steps I follow to reproduce the issue:
(See the emc-develop…
-
hey i saw your klipper firmware and config, and i decided to give it a go, how would i level with pr touch?
-
**Describe the bug**
LaserGRBL (including 5.0) claims to import the attached PNG successfully at 300dpi and resolutions above 4lines/mm, but creates an empty project. If saved, it produces empty gcod…
-
-
### Bug Description
While manual probing with LCD bed leveling, acting on jog and changing value on LCD mean no Z value change. Z value are changing only 2 or 3 jog step : mean multiple value of ME…
-
This is running 2.9.1 and master.
1. start configs/sim/gmoccapy/gmoccpy
2. load file without WCS definition, for example 'arcspiral.ngc'
3. Note how the spiral is centered on the origin in the pr…