-
Hi all
Sorry if this issue was already discussed but I wasn't able to find anything searching...
To test the genmon app, I forced a power failure and noticed two things:
1) it took 2 minutes be…
-
### Expected Behavior
Genmon and generator continue to communicate after generator starts
### Actual Behavior
As soon as generator starts, Genmon web app says it has lost communication with g…
-
@binarydev So far this fork has been rock solid. Thank you again for your time and work on this!
Question - The Mobile Link app includes the wifi strength. Do you know if this is available in the…
-
From [genmonpy-required](https://github.com/jgyates/genmon/wiki/1----Software-Overview#genmonpy-required)
```
The setremote command issues commands directly to the controller. Start and stop command…
-
Environment: Genmon V1.19.01 running on Raspberry Pi 3B+ connected to Generac Evolution 2.0 via USB-to-RS232 adapter.
I have been running Genmon for several years without any problems. Great prod…
-
First off... Really fantastic software!
I don't have a specific issue and I didn't see a way to direct message you. I apologise if this is not the appropriate way to contact you. Please allow me t…
-
My experience with Genmon began after purchasing a Generac 18kW, air-cooled, natural gas fueled, standby generator. I wanted to be able to monitor the operation of the generator and be alerted to pote…
-
Controller: Nexux, Air Cooled.
Feature request: is there anything in the Nexus interface that will/would allow genmon to reset maintenance alarms (e.g. check battery, change oil, etc.)?
-
I've tried unsuccessfully to generate an auth token (no result generated in terminal) and I think it's because Generac changed the login URL, any suggestions?
I tried going to https://api.m…
-
Is there a way to remotely clean the A or B maintenance schedule warning? I have a site that is only visited once per year so maintenance is performed slightly off and before the internal schedule. …