-
Hello!
I'm trying to decode GFSK pulse code in 169.4375MHz wmbus narrow band. Have a several captures and the demodulated outputs in RTL_433 don't seems that have a valid bits.
```
C:\Programes\Rad…
xjols updated
3 months ago
-
rtl-wmbus supports mode T1, mode C1 and mode S1 but not mode N as mentioned here https://github.com/weetmuts/wmbusmeters/issues/321. With the Support of mode N wmbusmeters project could benefit from i…
-
Nous n'avons toujours pas compris pourquoi le code ne se compilait pas, cependant, les conditions posant problèmes servant seulement à définir quel type de carte nous utilisons, et donc quel port défi…
-
I made some test with two very short programs (based on your examples!) on the feather... the dont have the same ENCRYPTION KEY but the receiver is still getting frequently messages from `rf69_manage…
-
Hi,
While quickly looking at the examples I noticed that is missing the set-modulation() option.
This would be pretty handy to avoid hardcoding the wanted modulation in the library itself.
-
### SOC
ESP32
### Lora IC
E22-900M22S (SX1262)
### Product Link
At the moment we are creating a website, very intensively
### Description
Hello, we are a research & development l…
-
Does it work for NodeMCU?
What is the wiring schema? Thanks!!! :)
-
**Is your feature request related to a problem? Please describe.**
I'd like to use RadioLib to receive GFSK modulated messages with RFM69 and RFM95 modules.
Per its spec sheets, the modules should s…
-
We are busy developing a new Sigfox device using the LR1110. Uplink works without issue. Downlink does not work. I can see that the message is received by the LR1110 and the EP-LIB goes through all th…
-
Expected data to be transmitted: "88ee88ee8888888e8888888e8"
Output from Universal Radio Hacker
![URH2](https://github.com/LSatan/SmartRC-CC1101-Driver-Lib/assets/45829953/83be9569-c092-4b35-a365-2c…