-
### PROBLEM DESCRIPTION
I have connected 5 LED strips (warm white) to a H801 controller and activated SetOption68 = 1 and set values for Color 23,61,71,69,46 and switch the individual channels ON/OFF…
-
### PROBLEM DESCRIPTION
Sonoff devices after upgrade to Tasmota 12.0.2 reboot every ~20 minutes with StatusSTK":{"Exception":29,"Reason":"Exception","EPC":["40252ca8",...
### REQUESTED INFOR…
-
PIO Core Call Error: "Error: Unknown environment names 'nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, esp32s2_saola, esp32c3, default_envs = d1_mini'. Valid names are 'esp32c3, codm-contr…
-
### The problem
There is a intense appx. 50ms long flash wenn connecting the H801 to power.
As discussed (and solved!) here in #1783 as well as at Tasmota:
[Tasmota 649](https://github.com/are…
-
### The problem
Hi i have same issue with h801 like in https://github.com/esphome/issues/issues/1783
Have someone solution for this?
Thank you.
i am using esphome: 2021.10.3
### Which versi…
-
### What happened?
The H801 was flased with webtool and NodeMCU Py flasher. in both cased thep was ereased. After Reboot the WLAN AP was active an i can configure my WLAN. After configure trhe WLAN t…
-
### What happened?
I tried all compiler flags to no avail.
The thing is just plainly broken by a git merge which the autor admits in the last GIT pull request.
Either he is not mentioning s…
-
### The problem
once the Tasmota H801 has been found by the integration, the RGB stripe can no longer be switched off. After a click on switch off, it will be switched on again immediately. there is …
-
### What happened?
As soon as I hit the button "TO THE CONROLS!" the controller crashed and reboots.
### To Reproduce Bug
1. Compile and upload current master branch to an [ESP32C3](https://d…
-
Hi there, my issue might be quite annoying to ask. I flashed your .bin file using NodeMCU-PyFlasher onto my H801 Led Controller. The first time a wifi was created and i could see the setup page. I fla…