-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi i added tmp421 sensor to evb-ast2600. Built an image and launched qemu using generated image. In webui i m not seeing any sensors.
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi,
Is there any plan to add i2c device memory operations? as here:
[https://docs.micropython.org/en/latest/library/machine.I2C.html#machine.I2C.readfrom_mem](https://docs.micropython.org/en/latest…
-
The current i2c_slave driver API is marked experimental and is generally undocumented. It is also unsuitable for DMA-based solutions like [Nordic SPIS](https://github.com/zephyrproject-rtos/zephyr/is…
-
You can probably run into the following error when running the examples:
```
Found compatible container dustynv/llava:r36.2.0 (2023-12-18, 8.0GB) - would you like to pull it? [Y/n] y
dustynv/llav…
-
### Board
ESP32 C6 WROOM 1
### Device Description
Unable to detect I2C sensor connected.
### Hardware Configuration
No only BME 680 was connected. SDA Pin 6, SCL Pin 7
### Version
other
### I…
-
Hello @dusty-nv
Here the command that I type as written in the README of Llama-Index. However, I can't understand why the Jupyter Server and Ollama Server aren't launching when running the contain…
-
Hello,
I am on my FW16 and I installed the service via paru from AUR. It was installed correctly, my config was edited but it does not do anything. My brightness stays at the same level. However, the…
-
Hi, im trying to get a CH101 sensor working with a STM32H747I Discovery kit
I think loading of the sensor is ok, but it doesn't seem to start any measurements (INT pin stays low)
See attached below …