-
I-Nex has support for the SPD, but not full. Please attach here the files from the directory:
EEPROM:
`ls /sys/bus/i2c/drivers/eeprom/*-****/eeprom
/sys/bus/i2c/drivers/eeprom/1-0050/eeprom
/sys/bus/…
-
I'm using a RPi Pico W with a [M24C08-DRE](https://www.st.com/en/memories/m24c08-dre.html) EEPROM. The latter has a lockable ID page, whose "lock status" can be tested by trying to write to it and wat…
-
Do 'I2C_Transmit' and 'I2C_Receive' functions work correctly?
When I use them, error 14 is returned.
-
The I2C EEPROM tests should fail on K64F for an other issue. Basically, due to this other issue, the K64F isn't able to read from the EEPROM. But, the ci-test-shield I2C EEPROM tests for writing/rea…
-
**Describe the bug**
When writing to a eeprom that is connected via i2c, a error log message is printed.
**To Reproduce**
To reproduce the issue, i connected a EEPROM to I2C_2 and compiled th…
chrta updated
3 years ago
-
OS: Fedora 40 (KDE)
Kernel: 6.8.5-301.fc40.x86_64 (64-bit)
lm-sensors: lm_sensors-3.6.0-18.fc40.src.rpm
Output from sensors-detect (note: secure boot is on)
```
# sensors-detect version 3.6.0…
-
First I was to say thank you for your excellent work on this an many other libraries. I see myself as a "skilled amateur programmer" so I wonder; how can I learn to write so compact (and so hard to un…
-
Mainline open source software for TI components expect I2C EEPROM for a board identifier.
BeagleBone AI rev A1 uses the eMMC linear boot partition for board identifier and serial number information…
-
Hi,
I want to build my own USBKVM. The BOM isn't clear on how big the 24Cxx EEPROM is supposed to be as the metadata in the Horizon project just says "24Cxx SOIC8" and not an exact part number. The…
-
Serial Monitor
[FROM M5Burner] COM3 opened.
[ 16270][I][display.cpp:545] loopOptions(): Number of options: 2
[ 19611][W][sd_diskio.cpp:104] sdWait(): Wait Failed
[ 19615][W][sd_diskio.cpp:512] ff_…