-
hi,
i came over from the [tasmota-thread](https://github.com/arendst/Sonoff-Tasmota/issues/2915#issuecomment-450739474) to try the rfid-pn532 driver.
as you mentioned to copy only the pn532.ino and …
ozett updated
5 years ago
-
The battery ideally should have over 2-hour life when powering Raspberry Pi Pico W, microphone, cellular chip, and ILI9488 screen. Also needs a charge controller, and a constant 5V output
-
hi
can it work for mcufriends lcd 3.95 with ili9488?
many thanks
-
Good morning dear TOBOZO I am trying this project with a tft ili9488 of 480 x 320 using the TFT_e_SPI library but I am unable to adjust the display resolution. 320 but it doesn't work alias (TFT_WIDTH…
-
Where is this module?
-
I need your help to connect my ILI9488 TFT SPI 3.5 480*320 resolution display with ESP32 . I need wiring diagram and user setup file for my project. Also I am not confirm
about my display driver…
-
Hi I have the driver compiled and running. It works fine in the default landscape mode.
I commented out the // #define DISPLAY_OUTPUT_LANDSCAPE
When I run ./fbcp-ili9341 , the screen comes up in…
-
The first example I tried for my new ILI9488 based 480x320 3.5" display shield was testcard_kbv.ino, which disappointingly only identified it as 320x240, and so only filled part of the display.
I t…
-
### Is your feature request related to a problem? Please describe.
I USE BOARD BLACKSTM32F407VET6 CONNECTED TO LCD ILI9488 SPI BUT IT DOESN'T WORK
I TRY DISCONNECT the RESET pin and connect it to th…
-
### Feature Request or Enhancement
I would like to make this [breakout board](https://fr.aliexpress.com/item/1005004083478309.html?spm=a2g0o.order_list.order_list_main.172.d6fe5e5bqs89RU&gatewayAdapt…
BMWK1 updated
10 months ago