-
# Describe the problem
When attempting to run InSpec in target-mode against Cisco IOS XE devices, InSpec is not enabling correctly on the device. Behavior was noticed when the return of the test che…
-
try .yang modules under /vendor/xe/, all of them give error during upload and compilation
-
SNMP was working fine on previous versions on my routers running ie 16.12.3 , both isr1121 isr 4221 .
After upgrading to 17.3.1 I got the following error message for all checks, hardware, interface…
-
### Description of Issue
I have been using the napalm '`get_network_instances(name='')'` to pull the details of all VRFs on the IOSXE device but it is given me the similar key error below no matter…
-
Configuration replace fails as it tries to remove the primary IP address first and this is not allowed if a secondary IP address exists.
This was on:
Cisco IOS-XE, Version 16.8.1
Had to remov…
-
Hi
i m very interested in your iosxe provider
I use terraform v 0.1.12 with c9500-48y4c v 17.8.1
some functions are well working.
Ethernet config, port Channel don’t work at all
Acl are creat…
-
##### SUMMARY
I tried to delete configuration from my IOS-XE switch with the ansible.netcommon.netconf_config module.
Pushing configuration is working fine, also commiting is working fine. But how d…
-
Hey,
i am not sure if this is a bug or false usage but here is my code:
```
def establish_subscription(self):
try:
xpath = "/ip-sla-ios-xe-oper:ip-sla-stats/sla-oper-entry"
…
-
I have configured dial-out RPC telemetry on a IR1101. I am interested in getting some information about signal strength, due to customer requirements.
I am not currently using a sim in the IR, jus…
-
Script seems to work great for most templates. But when using more advanced Velocity templates that utilize the built-in system variables (like __interface), I can't seem to get it to work.
I tried…