-
RFID sensor for temperature, humidity, pressure, etc.
with RFID as User Interface, both analog and switch on/off etc
RFID传感器作为交互界面以及环境感知
-
Hi all
Testing deep sleep on the m5 and it appears that once you enter deepsleep you have to leave the usb cable connected to get it wake up again. Anyway to avoid having to leave the usb cable con…
-
**Describe the problem you have/What new integration you would like**
The dev branch currently does support ILI9341 (but) the new M5Stack Core 2 device uses the slightly different ILI9342C displa…
-
When T-Call is powered by battery if battery voltage drops bellow ~4V I get brownout errors.
(observing serial connected via TX/RX UART not USB)
I am powering the device with multiple 18650 in pa…
-
Is the charging current intentionally set to 100mA?
How can I change this?
Loading a LiOn cell takes so long.
-
Hi is there a working version of the configuration.yaml for the current HomeAssistant?
-
Hello, I am using sim7020 and esp32 to connect to AWS MQTT and I have used digitaldragon/SSLClient@1.1.10 for ssl encryption.
However, in the running process, I found that the certificate file cannot…
-
Hello, I have been trying to use It with SD_updater, but when compiling It with platformIO i don't knwo where to find the .bin to use as an app. Any clue on how to solve this?
Thanks in advance.
-
**Describe the problem you have/What new integration you would like**
Please add support TFT capacitive touch display driver GT911 + ST7701 RGB+SPI 40pin
**Please describe your use case for th…
-
### Board
ESP32 Dev Model
### Device Description
ESP32 with a attached SIM800L module.
### Hardware Configuration
CPU Freq: 240MHZ (WiFi/BT)
Flash Freq: 80MHz
Flash size: 4MB (32Mb)
…