-
HI guys,
I have an openswan router with a dynamic IP address, connecting to a Juniper SRX with a fixed IP. I am using aggressive mode tunnel with a local ID. Heres the problem, the phase 1 accepts a …
-
Hello,
is it possible to configure the esp32 as a vpn tunnel with l2tp/ IPSec?
-
**Important notices**
Before you add a new report, we ask you kindly to acknowledge the following:
- [x] I have read the contributing guide lines at https://github.com/opnsense/core/blob/master/…
-
I'm running ovs 2.11.1 and trying OVN ipsec with libreswan. But the network failed to connect each other across nodes, when I enable ipsec in ovn-nb.
What I noticed from ovs-appctl -t ovs-monitor-i…
-
per discussion https://github.com/cilium/cilium/pull/17106#issuecomment-916297787, TUNNEL_MAP lookup is a fallback path for node pod cidr prefix, we could add the pod cidr prefix in IPCACHE and comple…
-
# ipsec auto --replace a; ipsec auto --replace b; ipsec auto --up a; ipsec auto --up b
104 "a" #4: STATE_MAIN_I1: initiate
003 "a" #4: received Vendor ID payload [RFC 3947] method set to=115
003 "a" …
-
ipsec auto --up on connection that is up should trigger ipsec-rekey
For some details on this, see ikev2-cp-rekey-01
-
On Step 1 of https://firehol.org/tutorial/fireqos-new-user/ and I am seeing some unexpected behaviour.
I have set the device name [ppp0], up/down bandwidth and started fireqos.
I have an IPsec tunn…
-
for instance, in compress-pluto-01:
```
-!!!! There should be no XFRM state/policy left here !!!
XFRM state:
XFRM policy:
+src 192.0.1.0/24 dst 192.0.2.0/24
+ dir out priority 2084814 ptype ma…
-
I have a Site-to-site tunnel via ipsec wich is working fine.
There is a local range of 10.1.60.0/24 and the tunnel connects to a remote range 10.1.10.0/23.
IF i run updown.sh vti64 up everything t…