-
### Describe the bug
Datapoints missing in blackbox logs on internal storage.
### To Reproduce
Just log data to blackbox and do a flight with throttle above 50%.
### Expected behavior
Blackbo…
-
Hi there, we are interfacing the FT232H with a slave device using pyftdi, using SPI for communication. We can write to the device, and it responds correctly on the logic analyzer. However, the retu…
-
From https://github.com/zephyrproject-rtos/zephyr/discussions/68423#discussioncomment-8379966
@erwango
^^ @FRASTM
I also noticed that "requires-ulbpr" is not implemented in stm32-qspi-nor driver…
-
how can I change the spi mode to 3?
it's mentions that it was verify on Micron N25Q, but it required spi mode = 3
I see any option to change the spi mode
-
I cannot upload firmware with Arduino IDE. It always show "Warning: No input file to program to flash". This is the full output log.
> [13:19:13.435] - Serial port is COM11
> [13:19:13.435] - ====…
-
Hi,
I've currently built a few KunaiGCs and am ready to perform the flashing steps. The CPLD seems straghtforward, although I am not sure which jedec file I should be using to flash, as that is not…
-
My institution uses base 10 for all storage quotas. When quotas are calculated from our storage system, we convert the raw quota from bytes to KiB by dividing by 1024 to generate the JSON file for OOD…
-
In GitLab by @michael.dreher42 on Jul 17, 2020, 05:29
I already started to implement this, but I don't have the full information. Please see attached Libreoffice spreadsheet for the structure of the …
-
The function `capacity` on the async `ReadNotFlash` trait is not async: https://github.com/rust-embedded-community/embedded-storage/blob/master/embedded-storage-async/src/nor_flash.rs#L18
I'm tryin…
-
Hello!
I am a fan of 8-bit microcomputers and an electronics hobbyist. I have built for my own use a cable for Commodore 128 that allows to view images from C128 on TV screen in 80 column mode and …