-
### Describe the problem
Dbus-serialbattery seems to start correctly, appears in remote console, communication to Jkbms occurs, but appears skipped because no device instance.
 with the latest driver version.
First time this occured was yesterday. I connected 1 of my 3…
PeerD updated
2 months ago
-
### Describe the problem
Hi, I am using a Victron Cerbo GX to connect to a JKBMS via bluetooth. When doing this, I am seeing an over 20W draw extra. We are working with a tight power budget, and I fe…
-
Hello,
I have two JKBMS with 18S LiFePo and SerialBattery 1.2.20240408 running.
Both Batteries are nearly identical. Battery two is 6 month younger and the cells might have 5-10Ah more.
In Seri…
wetty updated
2 months ago
-
Hi,
after having installed and configured driver dbus-aggregate-batteries, I realized that the driver remains empty after a start.
My setup is 4 LiFePO4 battery banks, each with 16 cells. The fi…
-
### Describe the bug
I swapped out the batteries connected to my JKBMS (from 100Ah to 280Ah), but systems 15s. I changed the maximum charge/discharge capavilities, and the total Ah in the BMS direc…
-
Hello, after setting up recommended design, I found out that Nano(5V 328p) wasn't hearing the BMS. It occurred that having VCC at 5.09V (when line at 1) and 5.09-2V at sending 0 was not enough to trig…
-
### Describe the problem
After every cerbo reset this alarm is raised.
### Driver version
Latest official release
### Venus OS device type
Cerbo GX
### Venus OS version
v350-13 / 3.41
### BMS…
-
### Describe the problem
Driver never connects to battery but does see the appropriate battery.
### Driver version
v1.3.20240705
### Venus OS device type
Raspberry Pi
### Venus OS version
v3.4…