-
I'm trying to install the ELS on my G0602 lathe using the StepperOnline iSV57T servo 24/72 belt drive and E6B2-CWZ6C encoder. I've acquired and assembled the Clough42 booster board and panel controlle…
-
How can I add a micro switch that will stop the stepper motor, after the distance I choose ?
-
G'day,
Got the following error when I tried run a backup with Grapple.
Unfortunately, it's quite a generic error message and I've no idea where to start.
It seems that the HOOK-ENV ought to have …
-
We ported [mcmod's gtceu wiki ](https://www.mcmod.cn/item/list/5343-1.html) to compass. A total of 300+ pages containing descriptions + tests of various machines and items. Since the original page was…
-
In a perfect world.. I could take these designs and send the gcode to my cutter/engraver! The interior polygons could use 50% laser strength to merely score the material, and then the end of the cutti…
-
here is a long winded video of me bumbling through some testing. I didn't test edge finding prior to today. Corner finding works well, as does center finding. I'm guessing you didn't put much time …
-
I'm thinking of setting this up on a common 3D printer platform (Arduino Mega 2560 + RAMPS 1.4 + LCD w/ SD card reader), and I'd like to make it run standalone (like Marlin does).
So, I figure I'm …
-
```
net spindle_encoder-rpm rio.spindle_encoder-rpm pyvcp.spindle_encoder-rpm
```
this auto generated config line in custom_postgui.hal seems to throw a pin not found error
Also the docs for v…
-
Project: cartesian line-up of two Y-axis/2NEMA - one X-axis/1NEMA - Z=servo S90 - Arduino Uno + CNC shield V3 - NC limit switches on X + Y - limit switch Z by jumper on SpnEn/GND - machine size X=70cm…
-
Hi,
is it possible to provide a TFT32 version of the CNC firmware supporting grbl? I‘d really love to use the display with my cnc router 😊.