-
I am implementing my own code to retrieve the GPS location but it is never updated,
I'm using a T-BEAM 1.2 which has a NEO-6M GPS module with AXP2101 chip, when I install meshtastic it can receive …
-
Hello, I am using the 1.7 FSK firmware on a LilyGo device trying to read the TPMS information from my Toyota Corolla. I am able to read the information using a DVB-T USB device connected to my PC but …
-
I am running 2 different Lilygo rtl433 ESP32 devices.
They had been running fine for the last couple of weeks.
Then recently, the one downstairs, started the following behavior.
1. Run fine for 1 …
-
Hi there,
I recently got my T-ETH-Elite with the LoRaWAN-Shield, the LoRaWAN-Module(SX1302), the LTE-Shield, and the LTE-Modul (A7670E). Now I want to build a Gateway which recieves the LoRa-Data a…
-
LoRa sender freezes on LoRa.endpacket(), I have a lilygo t-beam
-
I am very new to platformIO so suspect I might be doing something wrong.
I have downloaded the code, placed it in Projects \ LilyGo-AMOLED-Series-master.
Edited the PlatformIO.ini for examples/F…
dtswk updated
3 weeks ago
-
Hi, my Name is Kai and I had an Issue with the 2.8 T-RGB.
I used Platform and I can build the Examples and Update the ESP works. I get also a Success. But the Display has already Stripes after the Up…
-
Error I'm getting while building:
```
CMake Error at /home/pbowden/projects/lilygo-micropython/extmod/display/lcd/src/micropython.cmake:3 (include):
include could not find requested file:
…
-
Hi Im new here and like to learn but dont know how to start this project
First I wanted to learn how i can make the needed logfiles from the working car and the stand alone battery, I have those both…
-
Hello
I bought the board that has an ESP32 and a A7670G, to test it and because has an schematic to learn how everything works. The board, it's really good, but I have some dubts about the schematic:…