-
Hi,
I am designing remote control using Atmega16 and LLCC68(Ra-01SC)
My flow is when a user press a button, it will send a message and wait for response from the receiver and then it'll go to deep s…
-
code
===
```
#include
#include
#include "lora_service.h"
#include "config.h"
#include
// SX1262 has the following connections:
// NSS pin: 15
// DIO1 pin: 4
// NRST pin: 10
// BUS…
-
I have checked that, with some fast CPU devices and the Ra-01SC module (LLCC68), the "begin" method can return an error because the LLCC68 cannot initialialize between the sx126x_reset and the send of…
-
A type conversion is missing here. And it produces a warning when compiling.
https://github.com/Lora-net/llcc68_driver/blob/de10d4375f8df58dd169be7955b8e5461831793d/src/llcc68.c#L673
Maybe it sh…
-
Hi,
PAN3031 is just released https://www.iot-rf.com/LoRa-Module-dc17786.html. It's cheaper than LLCC68 about 20% to 30% depending on where you buy it. It has good range as per its document. I can't g…
-
I'm getting incorrect reads from GetDeviceErrors with LLCC68.
The library is sending 0x17 byte, as expected, but it must read 3 bytes from the response, but in sx126x_getDeviceErrors it is only readi…
-
**Description.**
Is the LLCC68 supported? The github page says it is, but the [GithubIO page](https://jgromes.github.io/RadioLib/) doesn't list it under supported modules. If it really is, would it b…
1sa4c updated
2 years ago
-
Hi,
As the LLCC68 is derivated from the SX1276, I would like to know if someone has tested the compatibility with the LLCC68 ?
Regards,
Thomas
-
- Describe the bug:
Using Ai-Thinker Ra-01SC (LLCC68) to do point-to-point lora communication, the sender uses ESP32-WROOM to send SHT31 sensor temperature and humidity data, and the receiver uses …
-
MCU:esp32 , Wireless module:LLCC68 ; Arduino IDE version :1.8.15
when radio.begin() get error -707
and radio.begin(868.0, 250.0, 7, 5, 0x34, 22, 10, 0, false); when send mesage get erro timeout.
…