-
I posted this here https://github.com/makerbase-mks/MKS-RUMBA32/issues/26 but have gotten no response so I'm hoping someone here will have an answer for finding a replacement mosfet for HE0...or if t…
-
Hello,
I have recently purchase MKS DLC32 board as an upgrade following the MKS DLC basic version.
Currently i was trying to find the firmaware file .bin to flash the firmware for my CNC machine…
-
Hey,
because i want to use the Daly BMS via CAN i ordered a Makerbase CANable USB Stick and implemented your library with CAN.
I put the files here: https://gist.github.com/derlucas/d548562492db96…
-
Hi,
I try with GRBL on Arduino UNO and can spin motor but when I try with GRBL on STM32 the motor did not spin.
https://github.com/makerbase-mks/MKS-Big-Current-Driver/tree/master/MKS%20TB67S109…
-
Is it possible to have the TFT70 BMPs? or the MakerBase Image Editor updated to open BINs. Thank you
-
Hi. Motherboard Robin e3d v1.1 tft35.
I can't configure Marlin. I do as it is on the Mks on Youtube tutorial, after trying to complicate it, I get a message;
#error '' PSU_CONTROL requieres PS_ON_PI…
-
I know about this problem https://github.com/makerbase-mks/MKS-Robin-E3-E3D/issues/101, I installed the right file, Robin_e3.bin from .pio/build/mks_robin_e3, but I still have this problem with both s…
-
Hello @makerbase-mks !
I've been using the TFT24 for my Laser and my CNC machine, however, I'd really like to customize it. I can see that this version seems to be the 3d printer version. Can you p…
-
I'm trying to use an external step driver (DM556), because I've got nema23 5.6A. But I'm not sure how to set up the wiring on TinyBee board.
So far I've tried some combinations that I've found for …
-
I built this source by IAR 7.5 and tried updating by using 16GB SD card (FAT32).
But it freezes at "Updating 100%" and it also stuck after rebooting.
If I use the same version of pre-build bin fil…