-
FYI: The wiki pages at reprap.org for RAMPS 1.4 (and related boards) was updated with much more info related to Marlin Firmware, also the page on mechanical endstops.
These pages should be able to …
-
Hello,
I have a strange problem with my Artillery Genius in connection with the PrusaSlicer, as soon as I want to start a print it shows me the error "Filament Runout", but this only happens when I…
-
### Did you test the latest `bugfix-2.1.x` code?
No, but I will test it now!
### Bug Description
WITH SYNTAX G2/G3 X Y Z I J F THE AXIS DO MOVE BUT VERY SLOWLY
This potential bug was first repor…
-
I'm thinking of setting this up on a common 3D printer platform (Arduino Mega 2560 + RAMPS 1.4 + LCD w/ SD card reader), and I'd like to make it run standalone (like Marlin does).
So, I figure I'm …
-
Please add a way to control the fan_1 trough touch menu. The FAN_1 produce a hiss noise when reduce to 50% ( i got a 12v noctua installed, must keep it at 12v so 50%). And sometimes I just want to tu…
albei updated
2 months ago
-
I've contacted the anycubic after sales to have explanations on the fact that the files published here are unusable.
Their reason is that the engineer who published the files forgot some files. I am …
-
A little series of articles about endstops, probes and homeswitches.
I want to cover:
* [Definitions / Naming](https://github.com/AnHardt/Marlin/issues/85#issuecomment-419881069)
* [Safety](https:/…
-
This UX was carried over from the original tool and difficult to use correctly.
1. Entering `start`, `stop` and `step` requires the user to do math and make sure that the `step` value evenly divides …
-
Hi,
I have had a couple of gear prints that fail get bad print results when using OcotPrint. The same gcode in repetier via a pc works perfectly without any small stops or hesitations in the movement…
-
**Is your feature request related to a problem? Please describe.**
Unable to control case light from touch screen. Have to go into Marlin mode to be able to change case light.
**Describe the solu…