-
While creating a custom model I tried to use the "groups" argument for a ConvTranpose2d layer but it had no effect. I checked the ai8x.py code and apparently the argument is missing as shown in the fo…
-
how do I start multigpu training? I have tried to use --gpus 0,1,2 or set the CUDA_VISIBLE_DEVICES=0,1,2. However, the model appears to only be running on the first specified gpu (in this case 0). Am …
-
Following this guide : [here](https://wiki.analog.com/resources/no-os/build)
I have tried to get into some of the project folders and build for maxim targets with no luck.
MAXIM_LIBRARIES is set an…
-
From the readme, normalization with ai8x.normalization should set the training/test data to range [-128, 128]. But, in some of the scripts eg datasets/imagenet.py, it says to map the data to this rang…
-
i have MAX78000 FTHR_RevA board .I want set up max9867 codec. I learn I2S config with example.
Codec is working,i found use
MXC_DMA_ReleaseChannel(0);
MXC_I2S_TXDMAConfig()
This code once pl…
-
```
//I changed the following changes as I want to check only power-down mode
#define USE_BUTTON 1
#define USE_ALARM 0
#define DISABLE_GPIO 0 //it configures all GPIOs as input to save power
…
-
Tried to include "i2s.h" in the cmsis examples with "arm_math.h" included.
If either header files are included individually, there is no issues.
But if both are included together, multiple errors …
-
Hello,
As a warming exercise for my I2C 10-bit addressing project I have been testing the master and slave examples on the Feather board and I run into an issue I would like to report.
I have te…
-
Hello,
Reading this in
[Data Loader Design for MAX78000 Model Training](https://www.analog.com/en/app-notes/data-loader-design-for-max78000-model-training.html) : Example: `def AISegment352_get_dat…
-
I am running evaluation on the tinierssd weights saved in trained from the repo. However, I am getting the error, and everything pauses after:
![image](https://user-images.githubusercontent.com/745…