-
For me it seems LMiC code in radio.c selecting the PA Output pin of SX1276 is erraenous. Always Pin PA_BOOST is selected. This can cause malfunction, if board hardware does not wire this pin, because …
-
**Consider raising support questions on the forum first**
There is a discussion site, [forum.mcci.io](https://forum.mcci.io), which includes a [category focused on the Arduino LMIC](https://forum.m…
-
The undocumented flag `ARDUINO_LMIC_PROJECT_CONFIG_H` is used to override the Arduino-specific (and inflexible and unpleasant) default configuration file. This needs to be documented in the README.
…
-
Update: See [further below](https://github.com/lnlp/LMIC-node/issues/45#issuecomment-1173196192) for a more complete description of the workaround.
---
I have observed a bootloop after using the…
-
When the server switches dimensions whilst server resource pack is enabled, This will cause the screen to show a half-black texture instead of fading animation until player is sent to different world.…
-
A user of my paxcounter software, which is based on MCCI LMIC, reports that `LMIC_setClockError` affects OTA joining - but in a way that smaller RX windows give better results. I don't understand this…
-
I may just be blind, but I could not find out how to set to eu_868, it would always default to us and if you change the build_flags option in the platformio.ini it would just throw errors, so I found …
-
Like described in the instructions for the Arduino IDE you have to "force" the size of the ROM to flash the Heltec Wifikit 32.
Actually you must not change the board name :
```
[env:geiger]
boar…
-
DFU is now supported. Need to pull in the instructions from pull request #24.
Split driver description up based on system in use:
1. Windows (as given in #24)
2. macOS (nothing to be done)
3. …
-
Need to re-factor to support other networks, so that ttn is not hard coded (search for Arduino_LoRaWAN_ttn).