-
Hi Team,
We are using Linux mcp 251xfd kernel driver on Xilinx SOC XAZU3 based SOC . The frames are sent from mcp chip on our board (mcp chip 2517fd connected to our SOC via SPI controller ) to C…
-
Just curious whether anybody else encountered this.
Test setup:
- A two-device setup on the CAN bus
- Device1 (d1) with MCP2517 sends a periodic message every 50ms
- d1 has an instrumentation …
-
Can anyone provide a short description on how to install this on an ESP32?
Or refer to a proper documentation?
I managed to install the included libraries wifi, comfoair, mqtt and ota by adding th…
-
I'm using this library for logging data sent on a CAN-Bus running at 500 kbit/s. The data is sent roughly at 1 kHz.
I have set up a [CAN Notifier](https://github.com/hardbyte/python-can/blob/develo…
-
### Describe the bug
The HAT has a dual channel mcp251xfd can chip, running on spi0.0 and spi1.0. While the driver loads and looks like it is working a number of issues are occurring,. A dmesg | gr…
-
i runthis command inside build folder
```
make CFLAGS='-std=c99
```
i got these errors
```
j1939cat.c:35:12: error: expected ‘;’ before ‘_min1’
typeof(x) _min1 = (x); \
^
j193…
-
With the last couple of PRs it's become possible to use your excellent library without needing to fork it to edit `esp32_can.h` and `esp32_can.cpp`. Instead, you can now:
```
#include "esp32_can_…
j4m3s updated
2 years ago
-
Hello,
I tried the sample test LoopBackDemoArduinoUno, before the new release it's ok,
But now i've a Configuration error 0x1 and i can't received anything.
Send return no error.
Can you help me …
-
Hello,
is the following addition possible?
Also insert the signed int-variables in the union? I add this in every version
public : union {
uint64_t data64 ; // Caution: subject to …
-
Hello again,
I'm continuing the developpement on STM32 and I'm having an issue concerning RAM writing. The _Test SPI connection_ of `eERRORRESULT Init_MCP251XFD(MCP251XFD *pComp, const MCP251XFD_Co…