-
### OpenOCD version
Open On-Chip Debugger v0.12.0-esp32-20240318 (2024-03-18-18:26)
### Operating System
Windows 11
### Using an IDE ?
Arduino 2.3.2
### OpenOCD command line
...local\\Arduino15…
-
Hi,
I use the `SnowflakeQuery` dialect to make queries. However, if I use any other field-based methods, double-quotes will show up in the final query:
```
groupby = [
'lot_id'
,'mfg…
-
BMeters Hydrocal M4
Using driver hydrocalm3
The data for heating is decoded properly, but cooling isn't. Same for the current volujme and power.
The device is showing 0.139 kWh of cooling energ…
-
Hi.
Just a super quick question: is there a way to have a npm script to not run electron at all in dev?
`npm run dev -- -no-electron`??
I just want to code the frontend and don't need electro…
-
I was attempting to use a User Defined Feature to work around a problem VDU.
First some general comments on the UDF's.
It would be good if filename was more easily derived or more exactly define…
-
For the buoy:
- [x] (4) plate anodes (2 per buoy) on buoy frame
- [x] (16) bolt-end anodes (8 per buoy) on buoy frame
- [x] (2) prop-shaft collar anode for each mooring swivel
- [ ] (??) various o…
-
## System Information:
- **ddcutil Version:** 2.1.2
- **Processor:** Intel® Core™ i5-4690K × 4
- **Graphics:** NVIDIA GeForce GT…
-
I need to set manufacturer data for my BLE advertisement.
Apparently the member-var "mfg_data" is supposed to store this info, however apparently it's not being taken into account / used at all.
Am …
mirko updated
4 years ago
-
## 🚀 Feature
A utility function to revert a sampled MFGs to a DGLGraph in heterogeneous graphs.
Input: an MFGs that come from NeighborSampler and NodeDataLoader
Output: 3 objects
> A diction…
-
From j1939-84 created by [ericthomasswenson](https://github.com/ericthomasswenson): Equipment-and-Tool-Institute/j1939-84#1180
Excess categories in Active Technology Display
| SAE/ISO Reserved …