-
Hello,I have encountered an issue where the results of ray tracing are inconsistent under the same conditions. When using Sionna RT in Jupyter Notebook, I calculated the phase differences between each…
-
### Description
Viewing scenes in 3D with a coverage map will cause AttributeError when using matplotlib==3.9.0. The "matplotlib.cm.get_cmap()" function has been deprecated since matplotlib version 3…
-
Hello. I purchased NETGEAR's A6210-100JPS to use the mt7612u in Japan (because it passed the technical standards and was sold in Japan).
However, when I investigated, I found out that
・txpower has l…
-
Hi! Please can you clarify if the chips supports mesh mode and the driver will eventually support it?
Thanks!
-
# 电气工程术语表 Glossary of Electrical Engineering Terms
>https://www.analog.com/cn/design-center/glossary.html
| 英文术语 | 中文术语 | 解释 |
| --- | --- | --- |
| sigma-delta | Σ-Δ | 一种模/数转换器(ADC)架构,由1位ADC…
-
```
C:\WINDOWS\system32>"C:\QGB\software\ssh\MobaXterm Professional 10.4\MobaXterm\slash\bin\telnet.exe" 192.168.88.254
Trying 192.168.88.254...
Connected to 192.168.88.254.
Escape character is …
-
Really appreciate it if someone could help me with this issue.
I followed the steps on this guide and get the following error:
```
root@DietPi:~# systemctl status hostapd
○ hostapd.service - Acc…
-
### Describe the bug
SNAPSHOT:
1. Comfast CF-953AX WiFi 6 USB adapter (mt7921au) doesn't start in AP mode (6 GHz band). `Frequency 6075 (primary) not allowed for AP mode, flags: 0x10001`
2. No 6 GH…
-
Hello, I have a new problem.I used two antennas as the transmitter and one antenna as the receiver to verify only the communication function. Set related parameters as follows:
_Sampl…
-
running "MIMO_OFDM_Transmissions_over_CDL.ipynb" notebook is returning error at the cdl_model for loop
python: 3.10.12
sionna: 0.15.1
TF: 2.14.0
```
for cdl_model in UL_SIMS["cdl_model"]:
…