-
I am trying to use this library on a Nano 33 IOT device which has built-in Wifi support and I have successfully run the example programs. It would be cleanest to use your NtpClock but it appears I h…
-
Hello guys.
First of all, please understand that i'm poor at english. because i don't live in english-speaking countries.
Problem :
i'm using two "mkr wan 1300" for trying peer to peer communica…
-
We are trying to connect an Arduino MKR WAN 1300 device to a Raspberry Pi zero W computer board by wiring the 13(RX), 14(TX) Pins of Arduino and the corresponding GPIO14 (UART0_TXD), GPIO15 (UART0_RXD…
-
Hey,
This is Sarath, Thanks for your work.
So I have issues in using W25Q64FV, I'm using TestFlash example code, I'm trying to write a string to a particular address, but it is writing random char…
-
I've build a single channel lora gateway. So my problem is that the Arduino MKR 1300 iterates over the different channels that can be found here(https://www.thethingsnetwork.org/docs/lorawan/frequency…
-
So, after trying to set up (without success) the mkrwan with a single channel gateway I am asking if someone has been able to do that?
Currently the mkr fw doesn't have the option (like the uno's) t…
-
I'm having exactly this problem described here: http://forum.arduino.cc/index.php?topic=536628.0
Can't send any payload containing `00` byte inside. The device gets stuck. If the payload does not c…
-
@nlohmann
Hi again.
What I want to achieve is pretty much the same as I said in the other issue I opened here, except now I just have a different kind of `json::exception` being thrown that I'm…
-
Hi,
I was trying this library on an Arduino MKR WAN 1300 to communicate with a Pycom board.
It wouldn't work until I explicitly called `LoRa.setSyncWord(0x34);`
The default sync word seems to be 0x…