-
### Subject of the issue
Hi, I'm trying to use your library to work with the MKR GPS Shield of Arduino. It seems that this library should work according to this page https://support.arduino.cc/hc/en-…
-
On the page [https://www.arduino.cc/en/Guide/MKRWAN1300](https://www.arduino.cc/en/Guide/MKRWAN1300)
- "For more details on the Arduino MKR WAN 1300 , see the product page."
The link is broken.
…
-
I have two arduino MKRWAN 1300, and want to send & receive by point to point. One board I loaded DumbModemLoRaSender, the other board I loaded LoRaReceiver. But, the receiver can't get anything. Pleas…
-
Hello,
I am using OTA sketch download using the example code provided (OTASketchDownloadWifi).
The example sketch uses 38724 bytes (14%) of program storage space. I am trying to download a sket…
-
Hey,
i started today using VS Code for programming Arduino sketches. I opened a sketch that I programmed with the Arduino IDE. After opening the file i selected my board and the arduino.json + c_cp…
-
I'm attempting to set the RX2DR value via the setRX2DR method, and then read back the value (in the serial monitor in Arduino) via the getRX2DR method to verify. When I do this, the same value of "8" …
-
About a month ago I was able to register my MKR1000 board with the IOT dashboard and get a very simple test project running. I went to revisit it a few days ago and noticed that through the online edi…
-
Hi,
I have been experimenting with this over the last few days running on an Arduino MKRWAN1300, in Australia (AU915, SB2, TTN).
ABP connection hangs forever on 1.2.3 firmware (no packets even make …
-
Hi
Please add commnad for exclude sketch in examples
-
Hi Rob,
I have a custom ATSAMD21G18A based board where I try to read 4 SHT31 sensors connected to 2 I2C interfaces.
I have had no luck with Adafruit_SHT31.h library reading both them (switching ba…