-
I'm unable to launch the app on a new install of Windows 11. I'm running ioSender Touch version 1.0.04. I can run ioSender 2.0.44 no problem.
this is the error I get after confirming the app config…
-
### Plugin Version
1.4.5
### Cura Version
5.7.0
### Platform
Windows 11
### Printer
Flsun QQ-S Pro
### Reproduction steps
Open Cura
I can see the printer contected message.
Swtich the monit…
-
Hello, the MKS DLC32 is a 3 axis Grbl board using an ESP32 it currently supports/runs 1.1f I have 2 of these boards and FluidNC has a drop-in YAML for them, but I like GrblHal and IOsender. I'm just …
-
Hey.. i followed the instructions,..
i flashed the image in step 1.
Put back the EMMC and turned printer on.
Display shows "The system starts abnormal"
Wanted to ssh in, but neither MKS or ROOT w…
cptcl updated
4 months ago
-
### Description
There some Artillery Genius PRO or X2 that are not able to flash the LCD firmware.
### Steps to reproduce
Try to flash as usual
**Actual behavior**
MKSTFT28.bin is not d…
-
When doing a restore of grblhal config using ioSender (latest) there are lots of errors.
Settings:
$170=0.000 returned error:53
$172=0.000 returned error:53
$370=2 returned error:52
$395=1 retu…
-
Initial marlin configuration has **Z_MIN_PROBE_PIN** and I don't see in manual what should it be. Currently my BlTouch doesn't work because of that I guess.
-
### Bug Description
I'm experiencing radom freezes when printing with Octoprint over serial connection.
Using SKR 1.4 turbo, RPI4, directly connected to TFT serial interface (SERIAL_PORT 0).
Runn…
-
### Description
When selecting the TFT microSD card to print models, the TFT goes back to the Main Menu. I've compiled from the master branch, from #1188 , and the latest from the releases page, …
-
Using Web Builder
Here is my config:
{"driver":"ESP32","URL":"https://github.com/grblHAL/ESP32","board":"BOARD_MKS_TINYBEE_V1","symbols":["OVERRIDE_MY_MACHINE=1","LWIP_HTTPD_CUSTOM_FILES=0","LWIP_…