-
Please post an example file for the bridge.cfg.
I would like to use this to make my existing Modbus TCP server accessible to the RTU gateway.
Regards,
-
I am trying to implement Modbus RTU slave and I have a problem with connecting client to that server.
I did as in an example (rtuslave_example.py), but the client is always returning `Timeout Error`.…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
![image](https://user-images.githubusercontent.com/65811029/187425678-e010168c-9d12-4a0a-b276-df3217369348.png)
寄存器地址 错误 程序会死掉 重新拔插usb 才能复活。
-
I have been having endless issues with timeouts on the rtu serial reads. So I have written a unit test to try and see what is wrong.
My read seems to take about 20 -30ms to send and reply,, this i…
-
Currently I am not be able to communicate to the Growatt inverter via Modbus.
I have a Waveshare RS485 To Eth(B) connected to the Growatt MIN 3000TL-X to the Sys-com connector.
The network connectio…
-
We have a modbus slave which implements modbus in the usual vendor way, i.e., wrong: It does not send CRC with error frames.
```
Req: 0A 01 04 A1 00 01 AC 63
Resp: 0A 81 02
```
To debug this…