-
Hello
I am using this integrations for my Solis RHI 10kW Hybrid inverter and it works very good!
I have also 2 regular inverters without battery. I't would be great if I can control this inverters…
-
When I test V5.5 library，I found there are differences between Modbus server register index and Modbus client register index.
Index of registers Modbus client class used is from 0 , while index …
-
Hey,
I created a Modbus Module for the ESP32 and need some people to test it :)
You can create a RTU-Master/Slave and TCP-Server/Client.
My own tests are passing, but it would be great, if some…
-
-
## Where?
In https://github.com/ISISComputingGroup/IBEX/issues/4240 basic communications with eurotherms using modbus were implemented. However, it currently needs a large number of scaling factors…
-
SRNE is fairly common; protocol is modbus. should be a quick addition.
-
I have a project in Arduino PLC IDE 1.0.3 where I've been using Modbus TCP to remote debug and download updates. Today after upgrading Arduino PLC IDE to 1.0.6 and re-initializing the Opta I can no lo…
JC-85 updated
1 month ago
-
### Description
Add suport inverter type X3-MIC/PRO SN MC80****
### Suggested Solution
Hello It is posible add suport Solax X3-MIC/PRO sn MC80**** mayby protocol is similar to other solax.
Thenks…
-
Hello,
I have 2 SUN2000-6KTL inverters connected in cascaded setup: Master that has smartpowermeter + battery has ID=3, and a slave inverter has slaveID=1. The external connection is a Wired dongle…
-
Current code use address 254 (0xFE) for communication. That address is a default MODBUS address only meant to used for test and should not be used in a MODBUS system since multiple units may respond t…