-
I have a Sungrow SG40CX-V112 and I am trying to scrape it's data. For now I have data pertaining to the meter it self. On level 3 I get this:
+------------------------------------------------------…
-
This device should be an abstraction of the MPPT.
-
On one of my "MPPT RS 450/100", the value for the total energy 'sensor.victron_solarcharger_yield_user_1' (register 790) started at zero again a few days ago. The overflow took place at 6553.5 kWh, wh…
-
Hi,
I have three strings on three MPPT in my system. Is it possible to show the three strings in the dashboard ?
Other thing, in the battery panel, the gauge of remain capacity protrudes on the left…
-
BanditFG wrote in the ioBroker Forum:
I would have a few wishes
- AC load total
- Grid total
- How many watts come from the MPPTs
-
App should not quit. Add try-catch clause.
/home/pi/github/MPPT/version3_0/raspberryPi/MPPT/node_modules/ws/lib/websocket.js:320
throw err;
^
Error: WebSocket is not open: readySta…
-
Solax X3 Ultra 25k > `H3BC25...`
_Originally posted by @simowNgithub in https://github.com/wills106/homeassistant-solax-modbus/discussions/520#discussioncomment-8790368_
Add support for SolaX Ge…
-
Hi,
I know this inverter isn't official supported but it seems to mostly work however i do get an Index Out of Range error when returning all Level 3 - am using this to get the MPPT outputs to check…
-
Please guys, I don't want to run messy cables all over the place, the SmartShunt and the MPPT can already talk to each other via the VE Network, please allow the Venus device ( Raspberry Pi4 with Blue…
-
Hello Mr. Barkestam.
I have two Victron systems.
1. GX Device
Multiplus 2
Mppt 150/45
2. GX Device
Mppt 75/20
Smart Shunt 48V/100A
The first system is interconnec…