-
#### MRE
Using the following sketch
- Arduino IDE v1.8.19,
- mbed_portenta core v2.6.1
- Portenta_H7_M7 with Murata WiFi
```
#ifdef CORE_CM7 // Start M7 Core programming
#include…
-
#### Describe the bug
For other board / core, whenever WiFi is lost, the `WiFi.begin()` function will reconnect to the restored WiFi AP, without the need of `WiFi.end()`
For Portenta_H7, using `…
-
Interestingly enough the wifi device isn't showing up on the STM32MP157F-DK2, with the Ubuntu20.04 release, even though it's the same chip as on the STM32MP157C-DK2. I tried running the activate_wif…
-
I'm using a Galaxy S8 (G9500 Snapdragon), which is currently not supported. Do I need to wait for a software update? Or is it a part of Google Play Service that I only need to wait for the service upd…
-
![image](https://user-images.githubusercontent.com/71565506/168282395-1fd3a87c-14ee-4186-94b7-ac0872307b55.png)
-
Hi everyone,
I was thinking about this for quite some time.
Is there any chance we could get Asteroid on huawei watch 2?
I would be glad to help on the porting.
-
![image](https://user-images.githubusercontent.com/5605614/140980533-66c3c7a5-695e-4c58-9163-7504333cfc82.png)
Both the [Arduino MKR WAN 1300 (LoRa connectivity)](https://store-usa.arduino.cc/…
-
I am looking into adding FOTA (Firmware Over-The-Air) updates to my Portenta. ~~After a bit of research I found [this wiki page](https://os.mbed.com/teams/Bluetooth-Low-Energy/wiki/Firmware-Over-the-A…
-
todo:
- Implement and debug a correct reset backend frontend.
- Check every variables to reset properly after each run on backend.
Edit: Backend don't even send every player....
-
Testing with android 9 , everything fine.\
Wifi Mac address set up with sony vendor mac.
Upgrade to android 10 without flashing 10 binaries,mac address came up correctly on boot.
The time that wifi…
ext32 updated
3 years ago