-
I would like to read a message from N2K, modify it, and forward to serial.
I can set up a tNMEA2000Handler for the PGN I want, and use the Set... function to configure the tN2kMsg, but it seems that …
-
I am have 3 device this type one fuel and two tank 1 and tank 2 all good show mfd ray marine and CPN via wifi gateway
-
Hi to everybody and tanks a lot for this magnific library!!
I'm replaicing my iTC-5 device with an arduino DUE. With this opportunity I also want to export some data to my PC via serial interface. I …
-
Navigation based on Raymarine Axiom with external receiver Raymarine RS150, connected to CPN via NMEA 2000 USB Gateway YDNU-02.
Connection in CPN NMEA2000
Dashboard displays status as on screen
![I…
-
In my config GPS derived info (position etc.) is forwarded to other instrumentation by Signalk server. Everything is ok with NMEA0183 devices (thru the Signalk to NMEA183 plugin) but NMEA2K instrument…
dpazz updated
4 months ago
-
Timo,
Could you please advise if the power supply configuration below is acceptable? (Board will be Teensy 4.0)
Many Thanks,
Jeremy Hudson
![N2K_TX_POWER](https://github.com/ttlappalainen…
-
Nice overview to see which NMEA0183 can be written from a N2k PGN (and which PGN information else is needed) found at Actisense:
http://www.actisense.com/wp-content/uploads/2017/07/2014-04-24-NGW-1…
-
Navgauge uses its own 'universal' format for sending basic navigation data to the browser. 'universal' and 'basic' mean that data from different sources (NMEA 0183, N2K, different sources within a N2K…
-
Dear Guys,
we are developing the future for sailboats. With vYacht as an N2K gateway we read and write the boat bus. Bernd is on board ;-)
For data exchanging signalk would be perfekt: Is the…
-
Want to develop the board at home rather than on the boat. Are there any simulator apps that can output general 0813 sentences and/or N2K frames?
ryall updated
6 years ago