-
Hello everyone,
I've been using an ASUS router to obtain the Channel State Information (CSI). However, I've encountered a recurrent issue: I keep getting incorrect amplitude values, which are often…
-
Hi, I'm a nexmon csi extractor user. I want to use csi to estimate whether each room is occupied in two adjacent rooms. If Tx is in the middle and there are people in Room 2 receiving csi from Rx1 and…
-
greetings,
As stated in many other work in **intel 5300** and **Atheros** chip CSI, the phase difference is pretty useful for: (1) Angle of Arrival (**AoA**) estimation, using the phase difference …
-
Is it possible to capture CSI from 11ax chips? There are lots of 11ax MIMO 4x4 160MHz router on market right now. And some of them are even cheaper than 11ac routers.
Could nexmon csi extend its scop…
-
BUILDING DRIVER for kernel 5.10 brcmfmac_5.10.y-nexmon/brcmfmac.ko (details: log/driver.log)
make[1]: *** No targets specified and no makefile found. Stop.
make: *** [Makefile:50: brcmfmac.ko] Erro…
-
Hi, I've installed nexmon csi on asus rt ac86u and I managed to capture CSI data. However, when I set the transmitter rate to be higher it suddenly stop capturing CSI from my transmitter. It can still…
-
Hi @matthiasseemoo @jlinktu
I am using the Nexmon_CSI on RT-AC86U. I am working on a passive sensing project. I want to get the CSI from all the available streams, so that I can sanitize it.
Is it…
-
Hi, I'm trying to compile nexmon_csi tool for ASUS RT-AC88U.
But, I met an error that "insmod: can't insert '/jffs/dhd.ko': invalid module format" at STEP 7. The ASUS RT-AC88U use the bcm4366e chip a…
-
When I run the command wget https://raw.githubusercontent.com/zeroby0/nexmon_csi/pi-5.10.92/install.sh -O install.sh
I got ERROR 404: Not Found
-
root@raspberrypi:/home/pi/nexmon/patches/bcm43455c0/7_45_189/nexmon_csi/utils/makecsiparams# iw phy `iw dev wlan0 info | gawk '/wiphy/ {printf "phy" $2}'` interface add mon0 type monitor
command fail…