-
User reported, that his device cannot be updated from 2.2 to 2.4. To investigate.
Tested: Linux, macOS, pynitrokey (Python 3.9), Firefox + Webupdate
Details: https://support.nitrokey.com/t/cannot-…
-
What about the open hardware/open source alternative Nitrokey: https://www.nitrokey.com/
-
Nitropy cannot view USB devices out of the box. Instead an error is shown: `usb.core.NoBackendError: No backend available`.
Stack trace:
(click me)
```
PS C:\Windows\system32> nitropy ls
*…
-
## Please identify some basic details to help process the report
### A. Provide Hardware Details
**1. What board are you using (see list of boards [here](https://github.com/eganonoa/heads/tree/m…
-
## Please identify some basic details to help process the report
### A. Provide Hardware Details
**1. What board are you using (see list of boards [here](https://github.com/eganonoa/heads/tree/m…
-
## Please identify some basic details to help process the report
### A. Provide Hardware Details
**1. What board are you using (see list of boards [here](https://github.com/eganonoa/heads/tree/m…
-
Not sure if this is the right place to ask for the "feature" as this is not related to the PCB but to the "housing" part (feel free to move it), but I like reporting things on GH rather than other pla…
-
I've built the firmware from source and verified that gpg mode works in the stock build (flashing over SWD):
```
./configure --vidpid=20a0:4211 --target=NITROKEY_START
```
```
[790047.231169] usb…
-
When trying to generate a key other than RSA2048 (that is RSA3072, RSA-4096 and ECC options) the key generation on OpenPGP Card v3 on Nitrokey Pro is failing.
## Expected Behavior
Generate keys on…
-
This was discovered while testing roms produced by https://github.com/linuxboot/heads/pull/1841 (after musl-cross-make version bump)
tested on x230-hotp-maximized (hotp-verification 1.6, nk3a firmw…