-
Hi.. the connection between nodemcu & firebase is hidden. . I changed fingerprint but same problem! !!
-
I am trying to connect ov7076 camera with nodemcu but there are no pin diagram available for the same. As nodemcu have storage equal to 4MBytes and memory 128KBytes. Is there any possibility to use it…
-
I noticed an issue (not sure if is my mistake) when using the library with nodemcu, no updates are send after the first one at the initial startup. For example, similar code with Arduino works fine.
…
-
> Have you searched for existing (open and closed) issues describing the same problem?
Yes
**Describe the error**
Whenever I try to upload the deauther code to my nodemcu board it just throws t…
-
**Following is the error message from IDE:**
```
Arduino: 1.8.7 (Windows Store 1.8.15.0) (Windows 10), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, 4M (1M SPIFFS), v2 Lower Memory, Disable…
-
I have several airrohr setups running. Some of them use a BME280 and some use a BMP280 (currently only one with BME280, 4 with BMP280, more BME280 are ordered). The ones with BMP280 show temperature a…
-
Hello there. I'm going to do a project like yours Rtl8370, but I cannot build firmware [nodemcu-firmware](https://github.com/libc0607/nodemcu-firmware).
I use a prebuild lua firmare ai-thinker_nodemc…
-
Hello Pol,
First of all thank you for the esp32lywsd03mmc project ! It was really helpful for me to include these small temp/humidity sensors in my Domoticz Home Automation system.
I first compiled …
-
Thanks for the awesome work, Doc! One issue that gave me some trouble:
For the file "BruhZzs_LEDs_Pub.ino" on a NodeMCU v2, there seems to be a potential pin definition issue at line #34 (#define DAT…
-
It just complicates things, there must be a better way